Technical data

Web Tools Administrator’s Guide 10-11
Publication Number: 53-0000522-09
Managing QuickLoops
10
Creating a QuickLoop
Use the following procedure to create a QuickLoop.
To create a QuickLoop
1. Launch the Zone Admin module as described on page 10-3.
2. Select a format to display zoning members in the Member Selection List as described in “Zoning
Views” on page 10-6.
3. Click the QuickLoop tab.
4. Click Create.
The Create New QuickLoop dialog displays.
5. Type a name for the new QuickLoop.
6. Click OK.
7. Click an element in the Member Selection List that you want to include in your QuickLoop.
The Add Member button becomes active.
8. Click Add Member to add QuickLoop members.
Selected members are moved to the QuickLoop Members area.
9. Optional: Repeat steps 7 and 8 to add a second element to your QuickLoop.
Adding and Removing Members of a QuickLoop
Use the following procedure to add or remove members of a QuickLoop.
To modify the members of a QuickLoop
1. Launch the Zone Administration module as described on page 10-3.
2. Click the QuickLoop tab.
3. Select the QuickLoop you want to modify from the Name drop-down list.
4. Highlight an element in the Member Selection List that you want to include in your QuickLoop, or
highlight an element in the QuickLoop Members that you want to delete.
5. Click Add Member to add a QuickLoop member.
Click Remove Member to remove a QuickLoop member.
Note
There is a limit of two members per QuickLoop. Only switches capable of running
QuickLoop are displayed in the Member Selection List.
Note
There is a limit of two members per QuickLoop. Only switches capable of running
QuickLoop are displayed in the Member Selection List.