Technical data

10-12 Web Tools Administrator’s Guide
Publication Number: 53-0000522-09
Managing Fabric Assist Zones
10
Renaming a QuickLoop
Use the following procedure to change the name of a QuickLoop.
To rename a QuickLoop
1. Launch the Zone Admin module as described on page 10-3.
2. Click the QuickLoop tab.
3. Select the QuickLoop you want to rename from the Name drop-down list.
4. Click Rename.
The Rename a QuickLoop dialog displays.
5. Type a new QuickLoop name and click OK.
The QuickLoop is renamed in the Zone Admin buffer.
Deleting a QuickLoop
Use the following procedure to delete a QuickLoop.
To delete a QuickLoop
1. Launch the Zone Admin module as described on page 10-3.
2. Click the QuickLoop tab.
3. Select the QuickLoop you want to delete from the Name drop-down list.
4. Click Delete.
The Confirm Deleting QuickLoop dialog opens.
5. Click Yes.
The selected QuickLoop is deleted from the Zone Admin buffer.
Managing Fabric Assist Zones
Fabric Assist is an extension to QuickLoop. A Fabric Assist (FA) zone allows private hosts to
communicate with public or private targets across the fabric.
Fabric Assist zones can be administered using Fabric OS v5.x; however, switches or directors running
Fabric OS v5.x cannot be members of a Fabric Assist zone. SilkWorm 12000, 24000, and 48000
directors and 200E, 3014, 3016, 3250, 3850, 3900, 4012, and 4100 switches cannot be members of a
Fabric Assist zone.
Note
You must have a QuickLoop license installed to create or modify a Fabric Assist zone.