Technical data
Web Tools Administrator’s Guide 10-17
Publication Number: 53-0000522-09
Managing Zone Configurations
10
5. Click Add Member to add a configuration member.
Click Remove Member to remove a configuration member.
6. Click Actions > Save Config Only to save the configuration changes.
To enable the configuration, refer to “Enabling a Zone Configuration” on page 10-18.
Renaming a Zone Configuration
Use the following procedure to change the name of a zone configuration.
To rename a zone configuration
1. Launch the Zone Admin module as described on page 10-3.
2. Click the Config tab.
3. Click the configuration you want to rename from the Name drop-down list.
4. Click Rename.
The Rename a Config dialog displays.
5. Type a new configuration name and click OK.
The configuration is renamed in the configuration database.
6. Click Actions > Save Config Only to save the configuration changes.
To enable the configuration, refer to “Enabling a Zone Configuration” on page 10-18.
Deleting a Zone Configuration
Use the following procedure to delete a zone configuration.
To delete a disabled configuration
1. Launch the Zone Admin module as described on page 10-3.
2. Click the Config tab.
3. Select the configuration you want to delete from the Name drop-down list.
4. Click Delete.
The Confirm Deleting Config dialog displays.
5. Click Yes.
The selected configuration is deleted from the configuration database.
Note
You cannot rename the currently enabled configuration.
Note
You cannot delete a currently enabled configuration.