Technical data
10-20 Web Tools Administrator’s Guide
Publication Number: 53-0000522-09
Managing Zone Configurations
10
Displaying the Zone Configuration Summary
The zone configuration summary hierarchically lists all defined zoning elements known to the current
Zone Admin session, whether any of the listed configurations has been enabled, and whether any of the
lower level elements has been added as members of the higher level (aliases, zones, QuickLoops, FA
zones) structures. The zone configuration summary displays the entire contents of the fabric zoning
database as it was at the time the Zone Admin session was launched, or the most recently saved or
refreshed information, and any unsaved changes you make since the time the Zone Admin session is
launched. It provides the name of the zone configuration that was enabled at the time you launched the
Zone Admin session; however, keep in mind that the enabled configuration might have changed since
then and that this screen will not reflect those changes.
To view a zone configuration summary report
1. Launch the Zone Admin module as described on page 10-3.
2. Click File > Print Summary.
The Zone Configuration Summary window displays, as shown in Figure 10-5.
It is important to note that the summary displays the information based on the changes just made. If
current Zone Admin session changes have not yet been saved to the fabric, the information
displayed here is different from what is seen from the switch.
3. Optional: Click Print to print the zone configuration summary. This launches the print dialog.
Figure 10-5 Zone Configuration Summary