Technical data

12-2 Web Tools Administrator’s Guide
Publication Number: 53-0000522-09
Enabling or Disabling FMS Mode
12
When FMS mode is disabled, mainframe management applications, director consoles, or alternate
managers cannot communicate with a director with CUP. In addition, when FMS mode is disabled on a
director, you cannot configure CUP attributes.
To enable or disable FMS mode
1. Click a FICON CUP-capable switch from the Fabric Tree.
2. Launch the Switch Admin module as described on page 4-3.
3. Click the FICON CUP tab.
The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in
front, as shown in Figure 12-1. All attributes on this tab are disabled until FMS mode is enabled.
4. Click the Enable radio button to enable FMS mode.
Figure 12-1 FICON CUP Management