Technical data

12-4 Web Tools Administrator’s Guide
Publication Number: 53-0000522-09
Displaying the Code Page Information
12
To configure FMS mode parameters
1. Click a FICON-enabled switch from the Fabric Tree.
2. Launch the Switch Admin module as described on page 4-3.
3. Click the FICON CUP tab.
The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in
front (see Figure 12-1 on page 12-2). All attributes on this tab are read-only until FMS mode is
enabled.
4. To enable or disable an FMS mode parameter, click the checkbox next to the parameter. A marked
checkbox means that the parameter is enabled. You cannot configure the User Alert Mode
parameter in Web Tools, as it is read-only.
Displaying the Code Page Information
The Code Page field identifies the language used to exchange information between the FICON director
and Host Programming. It is a read-only field in Web Tools, as it is set by Host Programming only.
When FMS mode is disabled, the code page is displayed as unavailable.
To display the code page information
1. Click a FICON-enabled switch from the Fabric Tree.
2. Launch the Switch Admin module as described on page 4-3.
3. Click the FICON CUP tab.
The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in
front (see Figure 12-1 on page 12-2). All attributes on this tab are read-only until FMS mode is
enabled.
Director Clock
Alert Mode
This parameter controls behavior for attempts to set the switch timestamp clock
through the director console.
When it is enabled, the director console (Web Tools, in this case) displays warning
indications when the switch timestamp is changed by a user application. When it is
disabled, you can activate a function to automatically set the timestamp clock. There
is no indication for timestamp clock setting.
This parameter is set as disabled by the hardware after system installation, and can
be reset by Web Tools.
Host Control
Prohibited
This parameter determines whether host programming allows modifying port
connectivity.
Enabling this mode prohibits host programming control of port connectivity;
otherwise, host programming can manage port connectivity.
This parameter is set as disabled by the hardware after system installation. and can
be reset by Web Tools.
Table 12-1 FMS Mode Parameter Descriptions (Continued)
Parameter Description