Technical data

Web Tools Administrator’s Guide 12-7
Publication Number: 53-0000522-09
Configuring CUP Port Connectivity
12
To display the CUP Port Connectivity Configurations list
1. Click a FICON-enabled switch from the Fabric Tree.
2. Launch the Switch Admin module as described on page 4-3.
3. Click the FICON CUP tab.
The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in
front (see Figure 12-1 on page 12-2). All attributes on this page are read-only until FMS mode is
enabled.
4. Click the CUP Port Connectivity subtab (see Figure 12-3).
Figure 12-3 Configuring CUP Port Connectivity
Creating or Editing CUP Port Connectivity
Configurations
Use the following procedure to create a new CUP port connectivity configuration or to edit an existing
configuration.