Technical data

Web Tools Administrator’s Guide 13-9
Publication Number: 53-0000522-09
Configuring Email Notifications
13
To configure the Email Alert alarm
1. Launch the Fabric Watch module as described on page 13-3.
2. Click the Email Configuration tab, as shown in Figure 13-3.
3. Click the Enable or Disable radio button to enable or disable the email alert status.
When you disable email alerts, Fabric Watch does not send email notification even if the email
notification method is assigned to monitored areas.
4. Type the email address of the recipient in the Recipient Email Address text box. Messages are sent
to this address when email notification is enabled.
5. Click Apply.
6. Optional: Click Send Test Email to receive a test email so you can verify the email notification is
working correctly. You can send a test email only after you have applied your settings.
Figure 13-3 Fabric Watch Email Configuration
Note
Email addresses must not exceed 128 characters.