Technical data

2-14 Web Tools Administrator’s Guide

Publication Number: 53-0000522-09

Accessing Web Tools for Advanced Management

To edit device accessibility

1. Click Edit in the task bar.

The Edit Device Accessibility (Zone) wizard launches.

2. Follow the instructions in the wizard to modify the device accessibility. Every HBA should access

at least one storage device, and every storage device should be accessible by at least one HBA.

The wizard automatically verifies device accessibility, generates the appropriate zones based on your

modifications to the matrix, and displays the zoning summary when you are done.

Restore Fixed Zoning

Fixed zoning is a preconfigured default zoning setup that is set at the factory. It enforces the rule of one

HBA port zoned with one storage port. Fixed zoning is hard zoning; each zone member is identified by

the default switch domain (1) and a port number. Fixed zoning is set up based on fixed port usage,

which means that a set of switch ports is designated to be used as HBA (host) ports and a set of ports is

designated to be used as storage ports.

To restore fixed zoning

1. Click Restore Fixed Zoning in the task bar.

2. Click Yes in the confirmation window.

When this task is complete, the matrix in the Zoning page is automatically updated to reflect the

changes.

Accessing Web Tools for Advanced Management

To manage the switch using the full power of Web Tools, ensure that you have completed all Web

Tools EZ tasks and then click Advanced Management at the bottom of the task bar. The Web Tools

EZ session will be closed. Any editing in Web Tools EZ that has not been applied is lost.

After entering Web Tools, you must re-log in to manage the switch.

You cannot return to Web Tools EZ unless you close and re-open your browser window and relaunch

Web Tools.

The remainder of this document describes the Web Tools interface.

Logging Out of Web Tools EZ

To log out of Web Tools EZ and log in as another user, click Log Out at the bottom of the task bar.

Web Tools EZ exits, and a new login window appears.