Technical data

Web Tools Administrator’s Guide 4-29
Publication Number: 53-0000522-09
Displaying Swapped Port Area IDs
4
Displaying Swapped Port Area IDs
Use this procedure to view swapped ports on the switch. You cannot swap ports using Web Tools: you
can swap ports using the Fabric OS CLI only.
To determine if a port area ID has been swapped with another switch port
1. Launch the Switch Admin module as described in “Launching the Switch Admin Module” on
page 4-3.
2. Click the Ports tab.
3. View the Port (Area ID) column in the Port Settings tab. For ports that have been swapped, the port
number is followed by the area ID, in parentheses.