Technical data
6-2 Web Tools Administrator’s Guide
Publication Number: 53-0000522-09
Creating and Maintaining User-Defined Accounts
6
Figure 6-1 User Tab
To display account information
1. Launch the Switch Admin module as described on page 4-3.
2. Click the User tab.
A list of the default and user-defined accounts displays. If you are logged in using the switchAdmin
role, only your account information is displayed.
Note that for the SilkWorm 3016 switch, the default administrator account name is “USERID” and
the default password is “PASSW0RD”. The “0” is the number zero and not the letter “O.”
To create a user-defined account
1. Launch the Switch Admin module as described on page 4-3.
2. Click the User tab.
3. Click the Add... button.
The Add User Account dialog displays.
4. Type the user name, which must begin with an alphabetic character. The name can be up to 40
characters long. It is case-sensitive and can contain alphabetic and numeric characters, the dot (.)
and the underscore ( _ ). It must be different from all other account names on the logical switch.