User Manual

Brocade Adapters Administrator’s Guide 129
53-1001583-01
auth
B
secret string Specifies the secret string. The maximum length of the secret is 63 bytes. The
default secret for each interface is its pwwn without the colons; for example,
0102030405060708.
--show Displays the authentication settings and current status.
port_id Specifies the ID of the port for which you want to display information.
--stats Displays the authentication statistics.
port_id Specifies the ID of the port for which you want to display information.
--statsclr Clears the authentication statistics.
port_id Specifies the ID of the port for which you want to clear statistical information.
Example Here is an example of the output when authentication is successful:
bcu auth --show 1/0
Here is an example of the output when authentication failed:
bcu auth --show 1/0
Here is an example of the output when authentication is not enabled:
bcu auth --show 1/0
bcu auth
--policy 2/1 on
Authentication turned on
bcu auth
--policy 2/1 off
Authentication turned off
bcu auth
--secret 5/0 “mypasswd”
Authentication secret set
bcu auth
--stats 4/1
successes: 1
failures: 0
auth_rx_stats:
auth_rjts: 0
auth_negs: 0
auth_dones: 0
dhchap_challenges: 2
dhchap_replies: 0
dhchap_successes: 1
port Port Status Auth Hash Type Group Type
1/0 Linkdown success MD5 DH-NULL
port Port Status Auth Hash Type Group Type
1/0 Linkdown failed MD5 DH-NULL
port Port Status Auth Hash Type Group Type
1/0 Linkup no_auth