Installation guide

FIGURE 2 Port numbering in the Brocade 7800 Extension Switch
1. Fibre Channel Ports 0 through 3
2. Fibre Channel Ports 4 through 15
3. GbE ports ge0-ge1 (fixed copper RJ-45 only)
4. GbE ports ge0 through ge5 - (SFP - optical or copper)
NOTE
You can also use port index and PIDs to identify a port. For more information, refer to the Fabric OS
Administrator's Guide.
You can have two trunking groups on a fully licensed Brocade 7800. Groups 1 would consist of FC
ports 0-7 and group 2 would be ports 8-15.
FIGURE 3 Trunking port groups and port numbers of the Brocade 7800 Extension Switch
1. Trunking port group 1: FC ports 00-07
2. Trunking port group 2: FC ports 08-15
Nonport side of the Brocade 7800
The following figure shows the nonport side of the Brocade 7800 Extension Switch, which contain the
combined power supplies and fans.
Nonport side of the Brocade 7800
Brocade 7800 Extension Switch Hardware Installation Guide 15
53-1001350-08