Installation guide

FIGURE 4 Nonport side of the Brocade 7800 Extension Switch
1 Fan and Power Supply Assembly 2 7 Fan assembly 1
2 Fan and Power Supply Assembly 1 8 FRU LED
3 Fan assembly 2 9 Power supply 1
4 FRU LED 10 Fan assembly 1
5 Power supply 2 11 FRU handle
6 Fan assembly 2 12 FRU handle
Brocade 7800 management
You can use the management functions built into the Brocade 7800 to monitor the fabric topology, port
status, physical status, and other information to help you analyze switch performance and to
accelerate system debugging.
NOTE
The Brocade 7800 automatically perform a power-on self-test (POST) each time it is turned on. Any
errors are recorded in the error log. For more information about POST, see POST and boot
specifications on page 37.
For information about upgrading the version of Fabric OS installed on your Brocade 7800, see the
Fabric OS Administrator's Guide
You can manage the Brocade 7800 using any of the management options listed in the following table.
Management options for the Brocade 7800TABLE 3
Management Tool Out-of-band Support In-band Support
Command line interface (CLI)
Up to two admin sessions and four user sessions
simultaneously. For more information, see the Fabric
OS Administrator's Guide and theFabric OS
Command Reference.
Ethernet (preferred) or
console port connection
IP over Fibre Channel
Brocade 7800 management
16 Brocade 7800 Extension Switch Hardware Installation Guide
53-1001350-08