Technical data
This product is designed for an IT power system with phase-to-phase voltage of 230V. After operation
of the protective device, the equipment is still under voltage if it is connected to an IT power system.
Items included with the switch
The following items are included with the standard shipment of the Brocade 7840:
• The Brocade 7840, containing two combined power supply FRUs with integral fans
• Three individual fan FRUs
• The following rack mount kits are available options:
‐ Fixed rack mount kit, with installation instructions
‐ Mid-mount kit, with installation instructions
• All Fibre Channel ports contain 16 Gbps SWL or LWL SFP transceivers
• One accessory kit, containing the following items:
‐ Brocade 7840 QuickStart Guide
‐ EZSwitchSetup CD Kit
‐ China-ROHS Hazardous/Toxic Substance Content Chart
‐ Documentation reference card (describes where to find relevant documentation)
‐ 24 16 G Brocade branded SWL or LWL SFPs, depending on the switch SKU ordered
‐ Network Advisor download insert
‐ Rubber mounting feet (to be used when setting up the Extension Switch as a standalone
unit)
‐ Two grounded 6-ft. (approximately 1.83 m) power cords:
‐ Power plug type: NEMA5-15
‐ Power plug current/voltage rating: 15A/125V
‐ Cordage type: SJT
‐ Current rating/wire gauge: 13A/16AWG with a 105°C (221°F) temperature rating
‐ Connector at system end of cordset: IEC 60320/C13
‐ Two power cord retainers
‐ One RJ-45 serial cable (10 ft. or approximately 3 m.). The Extension Switch uses an RJ-45
connector for the console port. An RJ-45 to DB-9 adapter is also provided with the switch.
Setting up the Brocade 7840 as a standalone unit
The Brocade 7840 can be configured as a standalone unit, which means that it resides outside of a
rack. Perform the following steps to configure the Brocade 7840 as a standalone unit.
1. Unpack the Brocade 7840 and verify that all ordered items are present.
2. Clean the four corner depressions on the bottom of the Brocade 7840 and place a rubber foot in
each one. This helps prevent the Brocade 7840 from accidentally sliding off the supporting surface.
3. Place the Brocade 7840 on a stable, flat surface.
Items included with the switch
Brocade 7840 Extension Switch Hardware Reference Manual 21
53-1003127-02