Technical data

Web Tools Adminstrator’s Guide 91
53-1002152-01
Port swapping index
6
If the port is on a blade, you must also provide the slot number.
NOTE
Port swap is not supported above the 16th port in a 48 port card in FMS mode.
8. Click Swap.
Determining if a port index was swapped
with another switch port
To determine whether a port was swapped, perform the following steps.
1. Select a port in the Switch View to open the Port Administration window.
2. Select the FC Ports tab.
3. Click Show Advanced Mode.
4. From the tree on the left, select the port you want to swap.
5. Click the General tab.
NOTE
The Port Index attribute on the General tab indicates whether a port was swapped. For ports
that were swapped, the attribute name displays as Port Index (Swapped), as shown in
Figure 14. The value indicates with which port index the port was swapped.
FIGURE 14 Port swapping index