Network Router User Manual

10 of 10 SilkWorm 3014 Documentation Insert
Publication Number: 53-0000689-01
Backing Up the Configuration
Back up the switch configuration to an FTP server by typing the configUpload command and following the prompts.
This command uploads the switch configuration to the server, making it available for downloading to a replacement
switch if necessary. Brocade recommends backing up the configuration on a regular basis to ensure that a complete
configuration is available for downloading to a replacement switch.
For specific instructions about how to back up the configuration, refer to the Fabric OS Administrator’s Guide. The
switchShow, fabricShow, and configUpload commands are described in detail in the Fabric OS Command Reference
Manual.
Connecting to the Switch Using Web Tools
To connect to the switch using Brocade’s Web Tools:
1. On the management console, open a Web browser, such as Internet Explorer.
The Web browser must be connected to the same network as the switch.
2. Enter the IP address of the switch in the address field.
Note
The cable connectors are keyed to ensure correct orientation. If a transceiver does not install easily, ensure that
it is correctly oriented.