Technical data

Restarting system.

6. Brocade switch console :

After the switch reboots, the console login prompt will appear.

swd77 console login: admin

Password: <admin_password>

Please change passwords for switch default accounts now.

Use Control-C to exit or press 'Enter' key to proceed.

Press Control-C to skip changing passwords.

swd77:admin> firmwaredownloadstatus

[1]: Tue Mar 9 20:21:37 2010

Firmware is being downloaded to the switch. This step may take up to 30 minutes.

[2]: Tue Mar 9 20:28:39 2010

Firmware has been downloaded to the secondary partition of the switch.

[3]: Tue Mar 9 20:33:02 2010

The firmware commit operation has started. This may take

up to 10 minutes.

Wait until the following output appears:

Firmwaredownload command has completed successfully.

Use version to verify the firmware version:

swd77:admin> firmwareshow

Appl Primary/Secondary Versions

------------------------------------------

FOS v6.2.1b

v6.2.1b

Check the FOS version.

To exit brocade switch console press Control + Shift + Underscore

Upgrade the other Brocade switch

Repeat Steps 3-6 on the second Brocade switch.

8. Management server: Remove temporary files

# cd

# rm –rf /var/TKLC/upgrade/brocade

3.3.3 Configure Zones in Brocade Switches

This optional procedure should be applied on both Brocade switches that are part of the same enclosure.

Zone settings have to be the same for both switches.

118

909-2209-001 Revision G, February 2014

3 Procedures