Technical data

Press Change System Configuration.

4. Fibre Channel Disk Controller GUI: Verify advanced settings

Verify that the following message appears above the System Configuration area:

5. Fibre Channel Disk Controller GUI: Logout

Logout by pressing the LOG OFF button on the left hand side.

3.4.4 Configuring Advanced Settings on P2000 Fibre Channel Disk Controllers

This procedure configures advanced settings on each P2000 controller.

Prerequisites:

•

3.4.1 Set IP on Fibre Channel Disk Controllersand

•

3.4.2 Configuring Fibre Channel Disk Controllers have been completed.

Note: If a procedural STEP fails to execute successfully, STOP and contact the Customer Care Center

by referring to the 1.4 Customer Care Center section of this document.

Connect to Fibre Channel Disk Controller via ssh as a manage user.

Output similar to the following will appear:

manage@10.240.4.205's password: <manage_password>

HPStorageWorks MSAStorage P2000G3 FC/iSCSI

System Name: Uninitialized Name

System Location: Uninitialized Location

Version: L100R010

130

909-2209-001 Revision G, February 2014

3 Procedures