Technical data

10. PM&C GUI: Add extra virtual disks
If the application requires extra virtual disks to be specified, repeat this step for each extra disk.
Click on the Add button at the top-right corner of the Virtual Disks pane
Size (MB): Click on the number to adjust the size via arrow or the keyboard.
Host Pool: The default vgguests storage pool is selected. Using the dropdown box, other pools
that have been configured on the TVOE can be selected.
Host Vol Name: Fill in this value. It must be unique amoung all disks on all guest hosted on the
TVOE.
Guest Dev Name: This is the alias that will be used inside of the TPD instance running on the
guest. It will help the application identify the disk.
Repeat, as needed, for all extra disks.
11. PM&C GUI: Add virtual NICs.
By default, the control network is configured, and is required for PM&C to install and upgrade the
guest. If this is removed, one will be added during the guest creation.
To add additional NICs, repeat this step using the insturctions below for each virtual NIC.
Click on the Add button at the top-right corner of the Virtual NICs pane
Host Bridge: Using the dropdown box, select the desired bridge that has been previously configured
on the TVOE.
Guest Dev Name: This is the alias that will be used inside of the TPD instance running on the
guest. It will help the application identify the network.
Repeat, as needed, for all vNICs.
255
909-2209-001 Revision G, February 2014
3 Procedures