Technical data

The primary disk is specified by the profile. The disk image at the left shows how the disk will be
populated with the archive's image. The only fields that should be modified are the Host Pool, and
Host Vol Name columns.
Host Pool: The desired storage pool can be selected here. It is possible that the profile did not
specify a value for the storage pool. The GUI will not allow you to continue until one is selected.
Host Vol Name: For the primary disk, this will be filled in automatically based on the guest name
provided above. It can be modified manually if needed.
12. PM&C GUI: Modify extra virtual disks
If the profile provides extra virtual disks to be specified they will show up below the primary disk.
If needed, extra virtual disks may be added at this time, as well.
Click on the Add button at the top-right corner of the Virtual Disks pane
Size (MB) : Click on the number to adjust the size via arrow or the keyboard.
Host Pool: The default vgguests storage pool is selected, but using the dropdown box, other pools
that have been configured on the TVOE can be selected.
Host Vol Name: Fill in this value. It must be unique among all disks on all guests hosted on the
TVOE.
Guest Dev Name: This is the alias that will be used inside of the TPD instance running on the
guest. It will help the application identify the disk.
Repeat, as needed, for all extra disks.
13. PM&C GUI: Edit virtual NICs
The required networks should be defined by default, the control network is configured, and is
required for PM&C to install and upgrade the guest. If this is removed, one will be added during
the create.
If additional NICs are required, repeat this step for each virtual NIC.
Click on the Add button at the top-right corner of the Virtual NICs pane
Host Bridge: Using the dropdown box, select the desired bridge that has been previously configured
on the TVOE.
264
909-2209-001 Revision G, February 2014
3 Procedures