Technical data

Update the form to reflect the desired NTP configuration and then select OK. NTP has now been
configured on the server.
4. Server: Exit platcfg.
Select Exit on each menu until platcfg has been exited.
3.11.3 Add SNMP trap destination on TPD based Application
This procedure will add an SNMP trap destination to a server based on TPD. All alarm information
will then be sent to the NMS located at the destination.
1. Server: Login as platcfg user
Login as platcfg user on the server. The platcfg main menu will be shown.
2. Server: Navigate to NMS server configuration page
Select the following menu options sequentially: Network Configuration > SNMP Configuration >
NMS Configuration. The 'NMS Servers' page will be shown, which displays all configured NMS
servers for the server.
271
909-2209-001 Revision G, February 2014
3 Procedures