Technical data

Fill in the appropriate value for this site:

____________________________________

<management_server_mgmtInterface>

Fill in the appropriate value for this site:

____________________________________

<management_server_iLO_ip>

Fill in the appropriate value for this site

________________________________________

DL380DL360Ethernet Interface

eth01eth01<ethernet_interface_1>

eth03eth02<ethernet_interface_2>

Platform 6.0Variable

gi1/40<management_server_switchport>

ValueVariable

Value gathered from site survey<mgmt_VLAN_ID>

pmacadmin<switch_backup_user>

Refer to TR006061 for this value<switch_backup_user_password>

Note: The onboard administrators that are connected to the failed switch will be unavailable during

this procedure.

Needed Material:

• HP Misc. Firmware DVD

•

HP Solutions Firmware Upgrade Pack Release Notes [3]

• Application specific documentation (documentation that referred to this procedure)

• Template xml files in an application ISO on an application CD.

Note: Filenames and sample command line input/output throughout this section do not specifically

reference the 4948E-F. Template settings are identical between the 4948E and 4948E-F. The original

4948 switch -- as opposed to the 4948E or the 4948E-F is referred to simply by the model number 4948.

Where all three switches are being referred to, this will be made clear by reference to '4948 / 4948E /

4948 E-F' switches.

Note: If a procedural STEP fails to execute successfully, STOP and contact the Customer Care Center

by referring to the 1.4 Customer Care Center section of this document.

1. Cabinet: Power off failed switch

If not already done so, power off the failed switch.

If the failed switch is DC powered, power off using the cabinet breakers, then remove the DC power

and ground cables.

If the failed switch is AC powered, remove the AC power cords from the unit.

2. Cabinet: Find and prepare to replace switch

909-2209-001 Revision G, February 2014

3 Procedures