Technical data

Chapter

1 Introduction

This document describes the procedures to configure

the hardware and platform components of an HP

Topics:

•

1.1 References.....10

c-Class system. An HP c-class system consists of

•

1.2 Acronyms.....10

enclosures and server blades. In addition, it may

include components such as switches, SAN

•

1.3 Terminology.....11

controllers, and management servers. It is assumed

•

1.4 Customer Care Center.....12

that prior to executing any procedures in this

document, power is available to each component

and all networking cabling is in place.

The procedures in this document are not in any

specific order. Each procedure describes a discrete

action. It is expected that application engineers will

reference individual procedures within this

document in their specific installation and

configuration procedures. It is the application

documentation that will provide the proper

sequencing of procedures, application specific

supplemental steps, and the passwords to be used

during the configuration.

Procedures from this document can be referenced

by their section numbers. For example: "Execute

Section 3.10.1 "Upgrade DL360 or DL380 Server

Firmware" of 909-2209-001."

FOR PLATFORM 4.2, REFER TO REVISION D

OF 909-1620-001.

FOR PLATFORM 5.X, REFER TO LATEST

REVISION OF 909-1620-001.

909-2209-001 Revision G, February 2014