Owner manual

Brocade 7800 Extension Switch Hardware Reference Manual 43
53-1001350-04
Index
A
Adaptive rate limiting, 1
additional licenses
, 3
AutoMDI/MDIX
, 13
B
boot, 35
BSMI statement (Taiwan)
, 39
C
Canadian requirements, 39
CE statement
, 39
command
ipaddrset
, 12
configuration
switch IP address
, 12
connect to the Extension Switch using the serial
connection
, 11
correct the time zone of a Extension Switch
, 15
create a serial connection
, 10
create an ethernet connection
, 13
D
data transmission ranges, 32
date setting
, 14
diagnostic tests
, 27
domain ID
, 13
E
electrical safety, 40
environmental
requirements
, 31
environmental requirements
, 31
F
facility requirements, 30
FastWrite
, 2
FCC warning (US only)
, 36
FCIP and Fibre Channel Routing Services configuration
, 16
FCIP QoS
, 2
FCIP trunking
, 1
FCIP tunnels
, 1
Fibre Channel Association
, x
Fibre Channel port specifications
, 34
Fibre Channel Routing Services
, 1
FICON CUP
, 2
FICON tape pipelining
, 2
field replaceable units (FRUs)
, 28
G
GbE port specifications, 34
general specifications
, 32
I
initial setup of Extension Switch, 9
install SFPs and cable the Extension Switch
, 16
installation and safety considerations
, 7
installing in an EIA cabinet
, 9
ipaddrset
, 12
items included with the SAN Router
, 8
L
laser compliance, 39
LEDs on the nonport side of the Extension Switch
, 26
LEDs on the port side of the Extension Switch
, 22