User Guide

MSDP peer information (Continued)TABLE 15
This field... Displays...
TotalRcv The number of sequence numbers received from the neighbor.
RcvQue The number of sequence numbers in the receive queue.
SendQue The number of sequence numbers in the send queue.
Displaying Source Active cache information
To display the Source Actives in the MSDP cache, use the following command.
device # show ip msdp vrf blue sa-cacheTotal of 10 SA cache entriesIndex RP
address (Source, Group) Orig Peer Age1 2.2.2.2 (192.6.1.10, 227.1.1.1)
192.1.1.2 0 2 2.2.2.2 (192.6.1.10, 227.1.1.2) 192.1.1.2 0 3 2.2.2.2
(192.6.1.10, 227.1.1.3) 192.1.1.2 0 4 2.2.2.2 (192.6.1.10, 227.1.1.4)
192.1.1.2 0 5 2.2.2.2 (192.6.1.10, 227.1.1.5) 192.1.1.2 0 6 2.2.2.2
(192.6.1.10, 227.1.1.6) 192.1.1.2 0 7 2.2.2.2 (192.6.1.10, 227.1.1.7)
192.1.1.2 0 8 2.2.2.2 (192.6.1.10, 227.1.1.8) 192.1.1.2 0 9 2.2.2.2
(192.6.1.10, 227.1.1.9) 192.1.1.2 0 10 2.2.2.2 (192.6.1.10, 227.1.1.10)
192.1.1.2 0
Syntax: show ip msdp [ vrf vrf-name ] sa-cache [source-address | group-address | peer-as as-
number | counts | orig-rp rp-address | peer peer-address ] [ rejected | self-originated ] ]
The source-address parameter selects the source address of the SA entry.
The group-address parameter selects the group address of the SA entry.
The peer-as keyword specifies the BGP AS Number of the forwarding peer.
The counts keyword displays only the count of entries.
The orig-rp keyword specifies the originating RP address.
The peer keyword specifies the peer address.
The rejected keyword displays the rejected SAs.
The self-originated keyword displays the self-originated SAs.
The following table describes the output from this command.
MSDP source active cache TABLE 16
This field... Displays...
Total The number of entries the cache currently contains.
Index The cache entry number.
RP The RP through which receivers can access the group traffic from the source
SourceAddr The IP address of the multicast source.
GroupAddr The IP multicast group to which the source is sending information.
IPv4 Multicast Protocols
132 FastIron Ethernet Switch IP Multicast Configuration Guide
53-1003085-02