Network Router User Manual

128 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
show
2
alarm-log
Privilege / Global Config
Displays the contents of the alarm log on the device
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show alarm-log {<1-65535>|acknowledged|all|count|new|
severity-to-limit}
show alarm-log severity-to-limit {critical|
informational|major|normal|warning}
Parameters
alarm-log [<1-65535>|
acknowledged|all|count|ne
w| severity-to-limit]
Displays the contents of the alarm log on the device.
• <1-65535> - Displays the details of a specific alarm ID
• acknowledged - Displays information for acknowledged
alarms currently in the system
• all - Displays all the alarms currently in the system
• count - Displays the number (count) of the alarms currently
in the system
• new - Displays those new alarms currently in the system
• severity-to-limit {critical|informational
major|normal|warning}
- Displays the alarms having
specified severity, as well as those alarms with a severity
higher than the specified value.
• critical - Displays all critical alarms
• informational - Displays all informational or higher
severity alarms
• major - Displays all major or higher severity alarms
• normal - Displays all normal or higher severity alarms
• warning - Displays all warning or higher severity alarms