Network Router User Manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 471
53-1001931-01
Chapter
15Standard ACL Instance
In this chapter
•Standard ACL config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471
•Use case: configuring IP standard ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485
The Standard ACL instance
(config-std-acl) is used to manage the standard Access Control
List entries associated with the controller.
To navigate to this instance, use the command:
RFController(config)#ip access-list standard [<ACL-name>|
<1-99>|<1300-1999>]
RFController(config-std-acl)#
Standard ACL config commands
Table 15 summarizes the config-std-nacl commands:
TABLE 15 Standard ACL Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 472
deny Specifies packets to reject page 473
end Ends the current mode and moves to the EXEC mode page 475
exit Ends the current mode and moves to the previous mode page 476
help Displays the interactive help system page 477
mark Specifies packets to mark page 478
no Negates a command or sets its defaults page 480
permit Specifies packets to forward page 481
service Invokes service commands to troubleshoot or debug
(config-if) instance configurations
page 483
show Displays running system information page 484