Owner's manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 183
53-1001931-01
Priv Exec command
4
debug
Priv Exec command
Use this command for debugging
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
debug [all|cc|ccstats|certmgr|dhcpsvr|imi|ip|logging|mgmt|
mobility|mstp|nsm|radius|redundancy|rns|securitymgr|sole]
debug all
debug cc [access-point|all|alt|ap-containment|ap-detect|
capwap|cluster|config|dot11|eap|ids|kerberos|l3-mob|
loc-ap|loc-client|media|wireless-client|radio|radius|self-heal|
smart|snmp|system|wips|wisp|wlan] {[debug|err|info|warn]}
debug ccstats <statsmodule>
debug [certmgr|dhcpsvr] [all|error|info]
debug imi [all|cli-client|cli-server|errors|init|ntp]
debug ip [https|ssh]
debug logging [all|errors|init|monitor|subagent]
debug mgmt [all|debug|err|info|sys|warning]
debug mobility [all|cc|error|forwarding|client|packet|peer|
system]
debug mstp [all|cli|packet|protocol|timer]
debug nsm
{[all|events|kernel|packet]}
debug radius {[all|err|info|warn]}
debug redundancy [all|ccmsg|config|errors|general|
heartbeats|init|packets|proc|shutdown|states|subagent|
timer|warnings]
debug securitymgr [acldebug|aclerror|all|debug|dosdebug|
doserror|error|ikedebug|natdebug|naterror|
packet-forwarding|pmdebug|pmerror|rulesdebug|
ruleserror|user]
debug sole [adapters|aeroscout|algo|all|cclib|ekahau|errors|
info|init]