Owner's manual

318 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
virtual-ip
Global Configuration commands
Displays virtual-ip configuration of the controller
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
virtual-ip [<A.B.C.D/M>|advt-timeout <1-5>|enable|
garp-timeout <30-600>|learning-timeout <2-5>|priority|vmac]
virtual-ip <A.B.C.D/M> vlan <1-4096>
virual-ip priority [<1-256>|auto]
virual-ip vmac <AA-BB-CC-DD-EE-FF>
Parameters
Example
RFController(config)#virtual-ip 192.168.11.10/24 vlan 11
RFController(config)#
RFController(config)#show virtual-ip config
VIP Status : Disabled
Cluster Redundancy Status : Enabled
Priority Selection Mode : Automatic
VMAC Selection Mode : Automatic
Learning Timeout(sec) : 2
Advertisement Timeout(sec) : 1
External VLAN : 0
External Gateway : 0.0.0.0
Virtual-IP Server Port : 51525
<A.B.C.D/M> vlan <1-4096> Displays virtual-ip configuration details of the controller
• <A.B.C.D/M> – Displays ip address of the controller
• vlan <1-4096> – Displays vlan of the vip
• <1-4096> – Displays the vlan range value of the
vip
advt-timeout <1-5> Displays advertisement timeout in seconds
• <1-5> – Displays the value in seconds
enable Enables IP Redundancy protocol
garp-timeout <30-600> Displays Gratituous ARP timeout in seconds . The default time is
180 seconds
• <30-600> – Displays value in seconds
learning-timeout <2-5> Displays learning timeout in seconds
• <2-5> – Displays learning timeout value in seconds
priority [<1-256>|auto] Displays priority of the controller
• <1-256> – Displays manual priority range
• auto – Displays automatic priority selection
vmac
<AA-BB-CC-DD-EE-FF>
Virtual MAC to be used by the master
• <AA-BB-CC-DD-EE-FF> – Allowed VMACs: from
00:15:70:88:8a:90 to 00:15:70:88:8b:8f