Vacuum Cleaner User Manual

14 Brocade SAN Switch Module: Installation Guide
Statement 8:
xx
CAUTION:
Never remove the cover on a power supply or any part that has the following
label attached.
xx
CAUTION:
Hazardous voltage, current, and energy levels are present inside any component that
has this label attached. There are no serviceable parts inside these components. If you
suspect a problem with one of these parts, contact a service technician.
Complete the following steps to install a switch module:
1. Review the information in “Safety and regulatory information” on page v
and
“Installation guidelines” on page 12 through “Handling static-sensitive devices” on
page 13.
2. Remove the
acoustic attenuation module option, if necessary, from the rear of
the Blade unit. See the Installation and User’s Guide for your Blade unit on the
Resource CD for detailed removal instructions.
Figure 3. Removing the acoustic attenuation module.
3. Make sure that the
Blade unit is turned on, the green dc power LED on each power
module is lit, and the green OK LED on the management module is lit.
4. Select only I/O bay 3 or bay 4 in which to install the switch module.
5. Remove the filler module from the I/O bay in which you are installing the switch
module. Store the filler module for future use.
Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil A Laser de Classe 1
`
Acoustic
attenuation
module
Locking
handle