Vacuum Cleaner User Manual

24 Brocade SAN Switch Module: Installation Guide
Port speed Green: Off The indicated Fibre Channel switch-module port (0 or
15) is operating at 1 Gbps.
Green: On The indicated Fibre Channel switch-module port (0 or
15) is operating at 2 Gbps.
Port status Green: Off No signal or the port diagnostics LED is active on the
indicated port (0 or 15).
Green: Steady The indicated port (0 or 15) is online.
Green: Flickering The indicated port (0 or 15) is connected and Fibre
Channel activity is occurring on that port.
Green: Flashing slowly The indicated port (0 or 15) is online but segmented
from the connected switch or device.
Green: Flashing rapidly The indicated port (0 or 15) is in the internal loopback
mode because of diagnostics.
Port diagnostics Amber: Off No faults on the indicated port (0 or 15).
Amber: Steady The indicated port (0 or 15) signal is present but not
online.
Amber: Flashing slowly The indicated port (0 or 15) has been disabled, or
switch beaconing is on.
Amber: Flashing rapidly This LED is lit on the indicated port (0 or 15) when the
port-diagnostics program has discovered an error
(port fault).
✏ NOTE
For LED locations, see Figure 9 on page 23.
Table 2. Switch-module LED descriptions (continued).
LED name LED color and state Hardware status