Vacuum Cleaner User Manual

29
8. To start a Telnet session, scroll down to the Start Telnet/Web Session section and
click Start Telnet Session.
The management-module command-prompt window opens, as shown in Figure 16.
Figure 16. Management-module command-prompt window for Fibre Channel
switch module.
9. At the Login prompt, type the initial default user name, USERID, and press Enter. At
the Password prompt, type the initial default password, PASSW0RD (the sixth
character is a zero, not the letter O), and press Enter. The user name and password are
case sensitive.
10. If you are accessing the switch module for the first time, press Enter to change the
switch passwords. You are prompted for a password for the root, factory, and user
accounts.
A window similar to the one in Figure 17 opens.
Figure 17. Management-module password-change window.