Vacuum Cleaner User Manual

34 Brocade SAN Switch Module: Installation Guide
Establishing a Web-interface session through the
management module
Complete the following steps to establish a Web-interface session through the Blade
management module:
1. In your browser, in the address field, type http://xxx.xxx.xxx.xxx, where xxx.xxx.xxx.xxx
is the IP address of the Blade management-module interface. Click GO or press Enter.
The Enter Network Password window opens.
✏ NOTE
The default IP address for the Blade management module is 192.168.70.125.
Figure 22. Enter Network Password window.
2. In the User Name field, type the initial default user name, USERID. In the Password
field, type the initial default password, PASSW0RD (the sixth character is a zero, not
the letter O). The user name and password are case sensitive.
The Active Session from Same Client window opens.
Figure 23. Active Session from Same Client window.
3. In the Inactive session timeout value field, select the timeout value for this Web
session and click Start New Session. The Blade management-module main window
opens.