Vacuum Cleaner User Manual

8. To start a Web-interface session, scroll down to the Start Telnet/Web Session section

and click Start Web Session.

The switch-module Advanced Web Tools interface window opens, as shown in Figure

28.

Figure 28. Advanced Web Tools interface window (management-module view).

9. To perform switch-module administrative tasks, click Admin, and log in to the switch.

In the User Name field, type the initial default user name, USERID. In the Password

field, type the initial default password, PASSW0RD (the sixth character is a zero, not

the letter O). The user name and password are case sensitive.

For more information about using the Advanced Web Tools interface, see the Brocade

Advanced Web Tools Administrator’s Guide v4.2.0 or later on the Resource CD.

Establishing a Web-interface session through a Web

browser

You can access the switch module by IP-enabled devices that are connected to the SBCE

management module. An Ethernet connection to the management-module external ports on

the Blade unit is required. For more information, see the following documents on the

Resource CD:

•

Intel Server Chassis SBCE Installation and User’s Guide

•

Intel Server Chassis SBCE Management Module Installation Guide

• Intel Server Management Module SBCECMM Installation and User’s Guide

Complete the following steps to establish a Web-interface session through a Web browser:

1. Open a supported Web browser on the network-management workstation.

2. Type one of the following Web addresses in the address field and press Enter. These

Web addresses contain default IP addresses.

For I/O bay 3:

http://192.168.70.129