Technical data

ServerIron ADX Administration Guide 139
53-1002434-01
Configuring authentication-method lists
2
TABLE 13 Authentication method values
Method parameter Description
line Authenticate using the password you configured for Telnet access. The
Telnet password is configured using the enable telnet password…
command. Refer to “Setting a Telnet password” on page 100.
enable Authenticate using the password you configured for the Super User
privilege level. This password is configured using the enable
super-user-password… command. Refer to “Setting passwords for
management privilege levels” on page 100.
local Authenticate using a local user name and password you configured on the
device. Local user names and passwords are configured using the
username… command. Refer to “Configuring a local user account” on
page 105.
tacacs Authenticate using the database on a TACACS server. You also must
identify the server to the device using the tacacs-server command.
tacacs+ Authenticate using the database on a TACACS+ server. You also must
identify the server to the device using the tacacs-server command.
radius Authenticate using the database on a RADIUS server. You also must
identify the server to the device using the radius-server command. Refer to
“Configuring RADIUS security” on page 122.
none Do not use any authentication method. The device automatically permits
access.