Technical data
ServerIron ADX Administration Guide 11
53-1002434-01
Managing System Functions
1
Syntax: show ip ssh
Displaying currently loaded public keys
To display the currently loaded public keys, enter the following command.
Syntax: show ip client-public-key
Managing System Functions
This section contains information on Managing the System Functions
Terminating the active CLI session
You can terminate the specified active CLI session and reset the configuration token. Once you
know the session ID of a Telnet connection (use the show who command), you can terminate it with
the kill command. If the terminated session was a console, the console is sent back into User EXEC
mode. If the terminated CLI session was a Telnet or SSH session, the connection is closed.
ServerIronADX# kill telnet 1
Syntax: kill {console | telnet <session-id> | ssh <session-id>}
Performing a lookup on a domain
To perform a lookup on a specified domain, enter the following command.
ServerIronADX# whois boole.com
Syntax: whois <host-ip-addr> | <domain>
The <host-ip-addr> parameter is a valid IP address and <domain> is a valid domain name. A DNS
gateway must be defined in order to use this command.
ServerIronADX(config)# show ip ssh
Connection Version Encryption Username
1 SSH-2 3des-cbc admin
ServerIronADX# show ip client-public-key
1024 65537 162566050678380006149460550286514061230306797782065166110686648548574
94957339232259963157379681924847634614532742178652767231995746941441604714682680
006445367903333042029124905690771828865418 39656556769025432881477252978135927821
67540629478392662275128774861815448523997023618173312328476660721888873946758201
user@csp_client
1024 35 152676199889856769693556155614587291553826312328095300428421494164360924
76207475545234679268443233762295312979418833525975695775705101805212541008074877
26586119857422702897004112168852145074087969840642408451742714558592361693705908
74837875599405503479603024287131312793895007927438074972787423695977635251943 ro
ot@unix_machine
There are 2 authorized client public keys configured










