Technical data

62 ServerIron ADX Administration Guide
53-1002434-01
Displaying system information
1
Syntax: show statistics ethernet<portnum> | slot <slot-num> | pos<pos-port> | brief |
dos-attack
The pos <portnum> parameter displays statistics for a specific POS port.
The ethernet <portnum> parameter displays statistics for a specific Ethernet port.
The slot <slot-num> parameter displays statistics for a specific chassis slot.
The display shows the following information for each port.
TABLE 3 CLI display of port statistics
This field... Displays...
Packet counters
Receive The number of packets received on this interface.
Transmit The number of packets transmitted on this interface.
Collision counters
Receive The number of collisions that have occurred when receiving packets.
Transmit The number of collisions that have occurred when sending packets.
Packet Errors
These fields show statistics for various types of packet errors. The device drops packets that contain one of these
errors.
Align The number of packets that contained frame alignment errors.
FCS The number of packets that contained Frame Check Sequence errors.
Giant The number of packets that were longer than the configured MTU.
Short The number of packets that were shorter than the minimum valid
length.
ServerIronADX# show statistics brief
Buffer Manager Queue
[Pkt Receive Pkt Transmit]
0 0
Ethernet Packets Collisions Errors
Port [Receive Transmit] [Recv Txmit] [InErr OutErr]
1 0 0 0 0 0 0
2 0 0 0 0 0 0
3 0 0 0 0 0 0
4 0 0 0 0 0 0
5 0 0 0 0 0 0
6 0 0 0 0 0 0
7 0 0 0 0 0 0
8 0 0 0 0 0 0
9 0 0 0 0 0 0
10 615934 4033121 0 0 0 0
11 0 0 0 0 0 0
12 0 0 0 0 0 0
13 0 0 0 0 0 0
14 0 0 0 0 0 0
15 0 0 0 0 0 0
16 0 0 0 0 0 0
17 0 0 0 0 0 0
ServerIronADX#