Technical data

ServerIron ADX Administration Guide 63
53-1002434-01
Displaying system information
1
Displaying port statistics
Port statistics are polled by default every 10 seconds.
You can view statistics for ports by entering the following show commands:
• show interfaces
• show configuration
Displaying STP statistics
You can view a summary of STP statistics on the ServerIron ADX. STP statistics are by default polled
every 10 seconds.
To view spanning tree statistics, enter the show span command. To view STP statistics for a VLAN,
enter the span vlan command.
Displaying trunk group information
To display trunk groups and their port membership for ServerIron ADXs, enter the following
command.
ServerIronADX# Show trunk
Configured trunks:
Trunk ID: 1
Type: Server
Ports_Configured: 2
Primary Port Monitored: Jointly
Ports 1 2
Port Names none none
Port_Status enable enable
Monitor off off
Mirror Port N/A N/A
Monitor Dir N/A N/A
Trunk ID: 3
Type: Switch
Ports_Configured: 2
Primary Port Monitored: Individually
Ports 3 4
Port Names custom* none
Port_Status enable enable
Clearing the statistics
To globally clear all counters on the system, enter the following command.