Technical data

64 ServerIron ADX Administration Guide
53-1002434-01
Using Syslog
1
Syntax: clear statistics [<options>]
Clearing all sessions
In rare instances, it may be necessary to delete all the sessions on the ServerIron ADX at once. You
can delete all regular (non-static) sessions on the ServerIron ADX, by entering the following
command (Use this command with caution).
ServerIronADX# clear server all-session
When you enter this command, all regular (non-static) sessions on the ServerIron ADX are deleted.
The command removes both active sessions as well as stale sessions in the delete queue.
Syntax: clear server all-session
Using Syslog
The ServerIronADX contains a syslog agent that writes log messages to a local buffer and optionally
to a third-party syslog server. The syslog feature can write messages at the following severity levels.
The device automatically writes the syslog messages to a local buffer. If you specify the IP address
or name of a syslog server, the device also writes the messages to the syslog server. The default
facility for messages written to the server is “user”. You can change the facility if needed. You also
can change the number of entries that can be stored in the local buffer. The default is 50. The
ServerIron ADX does not have a limit to the number of messages that can be logged on a remote
syslog server.
NOTE
You can specify only one facility.
Severity levels
The syslog agent writes messages to provide information about the following severity levels:
• Emergencies
• Alerts
• Critical
• Errors
• Warnings
• Notifications
• Informational
• Debugging
ServerIronADX# clear statistics ?
dos-attack Clear DOS-attack statistics
ethernet Ethernet port
pos POS port
rate-counters
slot Module slot
<cr>