Technical data

ServerIron ADX Administration Guide 77
53-1002434-01
Using Syslog
1
Informatio
nal
SNMP Auth. failure, intruder IP:
<ip-addr>
A user has tried to open a management session with the
device using an invalid SNMP community string.
The <ip-addr> is the IP address of the host that sent the
invalid community string.
Informatio
nal
Interface <portnum>, state up A port has come up.
The <portnum> is the port number.
Informatio
nal
Interface <portnum>, state down A port has gone down.
The <portnum> is the port number.
Informatio
nal
Bridge root changed, vlan <vlan-id>, new
root ID <root-id>, root interface
<portnum>
A Spanning Tree Protocol (STP) topology change has
occurred.
The <vlan-id> is the ID of the VLAN in which the STP
topology change occurred.
The <root-id> is the STP bridge root ID.
The <portnum> is the number of the port connected to
the new root bridge.
Informatio
nal
Bridge is new root, vlan <vlan-id>,
root ID <root-id>
A Spanning Tree Protocol (STP) topology change has
occurred, resulting in the Brocade device becoming the
root bridge.
The <vlan-id> is the ID of the VLAN in which the STP
topology change occurred.
The <root-id> is the STP bridge root ID.
Informatio
nal
Bridge topology change, vlan <vlan-id>,
interface <portnum>, changed state to
<stp-state>
A Spanning Tree Protocol (STP) topology change has
occurred on a port.
The <vlan-id> is the ID of the VLAN in which the STP
topology change occurred.
The <portnum> is the port number.
The <stp-state> is the new STP state and can be one of
the following:
• disabled
• blocking
• listening
• learning
• forwarding
• unknown
TABLE 4 Brocade Syslog messages (Continued)
Message
Level
Message Format Explanation