Technical data

ServerIron ADX Administration Guide 79
53-1002434-01
Additional system management functions
1
Displaying event log status
You can display the current status of the event log as shown in the following.
ServerIronADX# show eventlog
Event Log is enabled
Event Log MAX specified size is 256 MB
Event Log Size is - .2fMB
Syntax: show eventlog
The contents of the display are defined in the following table.
Clearing the event log
You can clear the event log as shown in the following.
ServerIronADX# clear eventlog
Syntax: clear eventlog
Additional system management functions
This section contains information on system management functions.
Configuring uplink utilization lists
You can configure uplink utilization lists that display the percentage of a given uplink port’s
bandwidth that is used by a specific list of downlink ports. Both transmit and receive traffic are
counted in each percentage.
NOTE
This feature is intended for ISP or collocation environments in which downlink ports are dedicated
to various customers’ traffic and are isolated from one another. If traffic regularly passes between
the downlink ports, the information displayed by the utilization lists does not provide a clear
depiction of traffic exchanged by the downlink ports and the uplink port.
Each uplink utilization list consists of the following:
• Utilization list number (1, 2, 3, or 4)
• One or more uplink ports
• One or more downlink ports
TABLE 5 Display from show eventlog command
This field... Displays...
Enabled Displays if eventlog is currently enabled.
Max Size of log The maximum size of the event log as currently configured. By default this
value is 32MB. Once the maximum log size is reached, the log file is
overwritten.
Current Size of log The current size of the event log file on the internal USB drive.