Technical data

ServerIron ADX NAT64 Configuration Guide 105
53-1002444-02
Applying IPv6 ACLs to interfaces
6
DRAFT: BROCADE CONFIDENTIAL
Table 14 lists ICMPv6 message types that are not supported for IPv6 ACLs.
Applying IPv6 ACLs to interfaces
To apply an IPv6 ACL to an interface, enter commands such as the following example.
TABLE 14 Unsupported ICMPv6 message types
Decimal ICMP message type
beyond-scope Destination Unreachable ICMP message, Beyond Scope
destination-unreachable Destination Unreachable ICMP messages
dscp Match DSCP value in IPv6 packet
echo-reply Echo Reply ICMP message
echo-request Echo Request ICMP message
header Parameter Problem ICMP Message,Header Error
hop-limit Time Exceeded ICMP Message, In Transit
log Log matches against this entry
mld-query MLD Query Message
mld-reduction MLD Reduction Message
mld-report MLD Report Message
nd-na ND Neighbor Advertisement Message
nd-ns ND Neighbor Solicitation Message
next-header Parameter Problem ICMP Message, Next Header
no-admin Destination Unreachable ICMP Message, Administratively Prohibited
no-route Destination Unreachable ICMP Message, No Route
packet-too-big Packet Too Big ICMP Message
parameter-option Parameter Problem ICMP Message, Option
parameter-problem Parameter Problem ICMP Messages
port-unreachable Destination Unreachable ICMP Message, Port Unreachable
reassembly-timeout Time Exceeded ICMP Message, ReassemblyTimeout
renum-command Renumber Command ICMP Message
renum-result Renumber Result ICMP Message
renum-seq-number Renumber Sequence Number ICMP Message
router-advertisement Router Advertisement ICMP Message
router-renumbering All Router Renumbering ICMP Messages
router-solicitation Router Solicitation ICMP Message
sequence Sequence number for this entry
time-exceeded Time Exceeded ICMP Messages
traffic-policy Attach traffic policy by name
unreachable Destination Unreachable ICMP message, Address Unreachable