Technical data

ServerIron ADX NAT64 Configuration Guide 21
53-1002444-02
Displaying NAT64 information
2
DRAFT: BROCADE CONFIDENTIAL
Displaying NAT64 statistics
You can use the show nat64 statistics command to display statistics for the NAT64 gateway. This
command can be used for stateful NAT64, stateless NAT64, and stateless NAT46 configurations.
The following output is for a stateful NAT64 configuration.
ServerIron ADX# rconsole 1 1
ServerIron ADX1/1# show nat64 statistics all
*********************
NAT64 Gateway STATISTICS
*********************
Packet processing:
Pre-proc internal SIP map create = 18
Pre-proc create DIP by removing prefix = 17
Pre-proc pending drop = 0
Stateless IPv6 prefix prepended = 0
Stateful IPv6 prefix prepended = 31
6->4 initiate dynamic learning = 0
4->6 initiate dynamic learning = 0
6->4 cannot initiate learning table full = 0
4->6 cannot initiate learning table full = 0
IPv6 statistics:
6->4 pkts recv = 18
6->4 v6 error = 0
Fast path statistics:
6->4 fast path candidate = 18
6->4 fast path processed pkt = 17
6->4 fast path processed pkt last sec = 0
6->4 fast path processed bytes = 2235
6->4 fast path processed bytes last sec = 0
6->4 fast path num tcp session lookup = 17
6->4 fast path num tcp session lookup found = 14
4->6 fast path candidate = 16
4->6 fast path processed pkt = 16
4->6 fast path processed pkt last sec = 0
4->6 fast path processed bytes = 1371
4->6 fast path processed bytes last sec = 0
4->6 nat64 num tcp session lookup = 16
4->6 fast path nat64 num tcp session lookup found = 0
Slow path statistics:
Slow path processed pkt = 0
Stateless Statistics:
TCP 6->4 = 0
TCP 4->6 = 0
TABLE 4 Display fields for show nat translation
Field Description
Pro The Layer 4 protocol: TCP. UDP or ICMP.
Client IP The IPv6 client IP address.
NAT IP The translated IP address from the NAT64 IPv4 pool.
Dest IP The IP address of the internal IPv4 resource.