Manualshelf

Technical data

ManualsBrandsBrocade Communications Systems ManualsHome Theater ServerServerIron ADX 12.4.00
31323334353637383940
26 ServerIron ADX NAT64 Configuration Guide
53-1002444-02
Clearing stateful NAT64 information
2
DRAFT: BROCADE CONFIDENTIAL
Clearing stateful NAT64 information
Use the clear nat64 statistics command to clear stateful NAT64 statistics on a ServerIron ADX. This
command is issued as follows:
ServerIron ADX# clear nat64 statistics
Syntax: clear nat64 statistics
Debugging stateful NAT64 configurations
Use the debug nat64 command to enable diagnostic debugging of stateful NAT64 configurations.
To debug a stateful NAT64 configuration, you must use the stateful operand such as in the
following example.
ServerIron ADX# debug nat64 stateful 192.0.2.1
In the example, diagnostic debugging is enabled for the IPv4 resource at the IP address 192.0.2.1.
Syntax: debug nat64 stateful all | <ipv4-address> | <ipv6-address>
The all operand displays debug information for all IPv4 and IPv6 source and destination IP
addresses.
The <ipv4-address> variable displays debug information for a specific IPv4 source or destination IP
address.
The <ipv6-address> variable displays debug information for a specific IPv6 source or destination IP
address.
Use the undebug command to disable debugging.
Number of IPv6 prefixes: Lists the total number of IPv6 prefixes on the system max: 8
Stateless IPv6 prefix: Indicates whether the IPv6 Prefix is configured as stateless.
NAT64 Stateless: Lists all NAT46 configuration.
IPv6 map hash table size: IPv6 map hash table size.
Max mapping entries: The max mapping entries allowed on the system.
Number of free map entries: The number of free map entries.
NAT64 IPv4 NAT Pools: Lists all NAT64 pool configuration.
Number of NAT pools configured: The number of NAT pools configured on the system.
Number of NAT pool IPs configured: The number of NAT pool IP addresses configured on the system.
The maximum number is 192.
Head pool: Identifier of the first pool configured.
Current pool: Identifier of the current IPv4 pool being used.
nat64 pool test: Lists details about the NAT64 IPv4 pools on the system.
TABLE 6 Display fields for show nat64 resources (Continued)
Field Description