Technical data

90 ServerIron ADX Graphical User Interface Guide
53-1002412-01
Content switching
7
To modify the configured response rules, in the summary table, select an entry and click Edit or
double-click the entry. You can also delete a configuration by clicking Delete.
For more information on configuring content switching rules, refer to the ServerIron ADX Server
Load Balancing Guide.
Creating policies
You can associate content switching rules to a policy (request or response) that defines how the
device process the traffic.
Creating request policies
A request policy associates request rules with one or more actions that specify how the ADX device
handles incoming traffic matching the rule. For more information on creating request rules, refer to
“Creating request rules” on page 82.
To create a request policy for incoming traffic on the device, perform the following steps within the
Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Content Switching, and then select Request Policies.
The Request Policies page is displayed, as shown in Figure 69
FIGURE 69 Request policy summary.
3. Click New at the bottom of the Request Policies page.