Technical data

94 ServerIron ADX Graphical User Interface Guide
53-1002412-01
Content switching
7
• Select the Log check box to write a message to system log when the specified rule is
matched, and specify the log format.
• Click Add to create a rule-action list.
The rule-actions list is displayed in the table. Select a rule in the table and click Remove to
delete the rule and the action from the list. Click the UP or DOWN button to arrange the
rule-action list in desired order.
5. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
Creating response policies
A response policy associates request rules with one or more actions that specify how the ADX
device handles outgoing traffic matching the rule. For more information on creating response rules,
refer to “Creating response rules” on page 87.
To create a Layer 7 response policy for outgoing traffic on the device, perform the following steps
within the Configure tab:
1. Click Traffic on the menu bar.
2. From the sidebar, select Content Switching, and then select Response Policies.
The Response Policies page is displayed, as shown in Figure 71.
FIGURE 71 Response policies summary
3. Click New at the bottom of Response Policies page.