Technical data

ServerIron ADX Graphical User Interface Guide 99
53-1002412-01
OpenScript
7
The Script Details - new page is displayed, as shown in Figure 76.
FIGURE 76 Configuring script details
4. Provide the following information:
• Script name: Enter the name of the script stored in the device.
• Script code: Enter the executable code of the script.
• Click Compile to compile the script code. You are recommended to compile a new script
before binding it to a virtual server port, to make sure that the script compiles successfully
and obtain an estimate of script performance.
5. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
For more information on configuring scripts, refer to the ServerIron ADX OpenScript Guide.
Binding scripts
The script binding operation compiles the script unconditionally and enables packet processing on
a specified server port or server.
To bind a virtual server port to a script profile on the device, perform the following steps within the
Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select OpenScripts.
3. Select an entry from the Configure Scripts page and click Bindings.