Technical data

106 ServerIron ADX Graphical User Interface Guide
53-1002412-01
SSL certificates
8
• Generating self-signed certificates. For more information on self-signed certificates, refer to
“Generating self-signed certificates” on page 107.
To generate a request for a certificate that will be sent to a CA to be digitally signed, perform the
following steps within the Configure tab.
1. Click Security on the menu bar.
2. From the sidebar, select SSL, and then select SSL Certificates.
The SSL Certificates page is displayed, as shown in Figure 84.
FIGURE 84 SSL certificates
3. Click Generate CSR at the bottom of SSL Certificates page.
The Generate CSR page is displayed, as shown in Figure 85.
FIGURE 85 Generating a CSR
4. Provide the following information:
• Key File: Select the private keys you generated.
• Encryption Password: Enter the password for the SSL certificate.
• Organization: Enter the name of your organization; for example, Brocade.
• Domain: Enter the name of your domain; for example, www.brocade.com.
• Department: Enter the name of the department; for example, Web Administration.
• City: Enter the name of your city; for example, San Jose.
• Email: Enter the e-mail address; for example, [e-mail].
• State: Enter the name of your state; for example, California.