Technical data

ServerIron ADX Graphical User Interface Guide 109
53-1002412-01
SSL profiles
8
1. Click Security on the menu bar.
2. From the sidebar, select SSL, and then select SSL Profiles.
The SSL Profiles page is displayed, as shown in Figure 88.
FIGURE 88 SSL profile summary
3. Click New at the bottom of SSL Profiles page.
The Configure SSL Profile page tab is displayed, as shown in Figure 89.
FIGURE 89 Configuring a profile
4. Under Basic tab, provide the following information:
• Profile Name: Enter the name of the SSL profile being defined.
• Key File: Select the RSA key pair file that was generated to associate it with the SSL profile.
• Certificate File: Select the certificate file that was self generated or imported to associate
it with the SSL profile.
• Chaining: Select the Enable check box to configure the device to send the entire certificate
chain including the root CA certificate and any intermediate CA certificates when
presenting the certificate to the client.
• SSL 2.0: Select the Enable check box to enable SSL 2.0. By default, the device supports
SSL 3.0.